xEffect Combined RCD/MCB Device FRBdM, 1+N and 2-pole
Questo interruttore magnetotermico differenziale di alta qualità con protezione da sovracorrente integrata in 1 polo+N e 2 poli è combinato con un interruttore modulare con scatto dipendente dalla tensione di linea e un'ampia varietà di correnti di apertura nominali. La sua tecnologia integrata offre diagnostica predittiva del livello di corrente di dispersione via indicazione LED.
Gamma completa di accessori adatti alla successiva installazione
Indicatore posizione di contatto rosso/verde
Indicatore d’intervento per corrente di guasto bianco/blu
Guida per la connessione di terminali sicura
Le clip DIN rail a 3 posizioni consentono la rimozione dal sistema barra collettrice esistente
Correnti nominali fino a 25 A
Caratteristiche di apertura B, C, D
Potere di apertura nominale 10 kA
Tipo A: Protegge da forme speciali di CC pulsante residua non stabilizzata
Tipo G: ritardo di tempo da 10 ms allo scopo di evitare l’apertura involontaria, per esempio durante i temporali
Tecnologia digitale integrata per indicazione di corrente di dispersione
1 polo+N e 2 poli
Apertura dipendente dalla tensione di linea
All in one device
Eaton's high quality standard guarantees comprehensive personal- and equipment protection by combining the functionalities of a residual current circuit breaker with those of a miniature circuit breaker. This means our customers spend less time and effort wiring while still protecting the system against overload, short circuit and residual current. Deploying Eaton's line of RCBOs increases your system reliability and safety.
Suitable RCD/MCB types for all contingencies
Separate end circuits increase the system availability and operational safety to a high extend. Faults will affect only an end circuit and not a root protection device and provides additional ease at finding a fault. Furthermore, a root RCD will have to work with various noises and an added sum of leakage currents during normal operations, which could lead in the worst case to unwanted nuisance tripping. Protecting circuits individually against residual currents guarantees highest system availability!
Type A: Protects against special forms of DC residual currents.
Type G: Protection against nuisance tripping with time delayed characteristic and additional surge current proof capabilities.
Type F: Higher immunity against smooth DC currents and enhanced surge current proof capabilities. Detection of fault currents up to 1 kHz.
IEC Standard quality design
Eaton´s RCBOs adhere to IEC / EN 61009 – a standard covering residual current operated circuit-breaker with integral overcurrent protection (RCBOs) for fixed installation up to 125 A.
All requirements according to the product standards are fulfilled and applicable additional standards are printed onto the device itself.
Type F for industrial applications and machinery
Outages of machines are costly and finding the reason can be problematic. Often the reason can be that modern machines have modern loads built into them. Mains filters can cause disturbances to the incoming line and can change the behavior of the RCD in series. More often, loads have single phase inverters built in. High frequency- and extended DC-immunity incorporated in a protection device with high surge current proofness enables the next generation of machines to become safe above the standard.
Online configurator - design your own customized configurations
The xComfort KLV series and our switching and protection devices are based on a modular design so that you can assemble any combination you need. In addition to a number of standard pre-wired distribution boards, Eaton also supplies customized configurations on request. If you are not yet sure which type of distribution board is the right fit for you, simply fill in our configurator with ordering function.
Invia e-mail
Domande frequenti MyEaton
