The MTL600 range of digital indicators enable process variables to be displayed locally in hazardous and general purpose plant areas. A typical example would be the re-transmission of mass/flow computations from the safe area, through a suitable MTL IS interface to the indicator in the hazardous area.
The displays are loop powered from the 4-20mA process signal and their low voltage drop allows them to be installed in almost any 2-wire, 4-20mA transmitter loop. All units can indicate measured values in a linear or a square root extraction mode; the latter being used, for example, to display flow from differential pressure measurement devices such as orifice plates, Dall tubes, or venturi.
The MTL661 field mounting unit is housed in a tough aluminium enclosure, suitable for wall or pipe mounting. For corrosive atmospheres, use the MTL663 - the plastic case provides excellent resistance to harmful contaminents.
The MTL665 is the panel mounted version and is IP65, IP66, IP67 and NEMA 4 rated.
MTL66x IS indicators are classified as ‘non-energy storing’ simple apparatus so they can be inserted into any IS loop without re-certification.
For MTL66x & MTL66xB models
For MTL66x & MTL66xB models
CE marked for compliance with EMC, ATEX and RoHS Directives.
Approvals held and approval details vary between models. Please refer to certificates for specific details.
La tua ricerca "" non corrisponde a nessun documento o prodotto.
Invia e-mail
Domande frequenti MyEaton
