Download document () of 20
Send email
Download
You have exceeded the download limit
UPS rating (0.9 power factor) |
|||||||||
| kVA | 225 | 275 | 300* | 450 | 550 | 650 | 825 | 1100 | |
| kW | 202 | 247 | 240 | 405 | 495 | 585 | 742 | 990 | |
| * Based on 0.8 p.f. | |||||||||
General |
|||||||||
| Efficiency in double conversion mode (full load) | >94,3% | ||||||||
| Efficiency in double conversion mode (half load) | 93.3% | ||||||||
| Efficiency in Energy Saver System (ESS) | up to 99% | ||||||||
| Distributed parallelling with Hot Sync technology | 5 | ||||||||
| Internal N+1 redundance capable | from 225 to 825 kVA | ||||||||
| Field upgradeable | Yes | ||||||||
| Inverter/rectifier topology | transformer-free IGBT with PWM | ||||||||
| Audible noise | <76 dB; <81 dB (825 and 1100 kVA) | ||||||||
| Altitude (max) | 1000 m without derating (max 2000 m) | ||||||||
Input |
|||||||||
| Input wiring | 3 ph + N + PE | ||||||||
| Nominal voltage rating (configurable) | 220/380, 230/400, 240/415 V 50/60 Hz | ||||||||
| Input Voltage range | +10% / -15% | ||||||||
| Input Frequency range | 45-65 Hz | ||||||||
| Input Power factor | 0,99 | ||||||||
| Input ITHD | less than 4,5% | ||||||||
| Soft start capability | Yes | ||||||||
| Internal Backfeed Protection | Yes | ||||||||
Output |
|||||||||
| Output wiring | 3 ph + N + PE | ||||||||
| Nominal voltage rating (configurable) | 220/380, 230/400, 240/415 V 50/60 Hz | ||||||||
| Output UTHD | <3% (100% linear load); <5% (standard nonlinear load) | ||||||||
| Output power factor | 0.9, 0.8 for 300 kVA | ||||||||
| Permitted load power factor | 0.7 lagging - 0.8 leading | ||||||||
| Overload on inverter | 10 min 100-110%; 30 sec 110-125%; 10 sec 125-150%; 300 ms >150% |
||||||||
| Overload when bypass available | Continuous <115%, 20 ms 1000% Note! Bypass fuses may limit the overload capability |
||||||||
Battery |
|||||||||
| Type | VRLA, AGM, Gel, Wet Cell | ||||||||
| Charging method | ABM technology or Float | ||||||||
| Temperature compensation | Optional | ||||||||
| Battery nominal voltage (lead-acid) | 480 V (40 x 12 V, 240 cells) | ||||||||
| Charging current/Model | 275 | 550 | 825 | 1100 | |||||
| Default A | 38 | 76 | 114 | 152 | |||||
| Max* A | 83 | 166 | 249 | 332 | |||||
| *Limited by maximum UPS input current rating | |||||||||
Dimension and Weights |
|||||||||
| 225 kVA, 275 kVA, 300 kVA | 1350 x 880 x 1880 mm (wxdxh) | 830 kg | |||||||
| 225 kVA redundant, 275 kVA redundant, 300 kVA redundant |
1890 x 880 x 1880 mm | 1430 kg | |||||||
| 450, 500, 550 kVA | 1890 x 880 x 1880 mm | 1430 kg | |||||||
| 450, 550 kVA redundant | 2520 x 880 x 1880 mm | 2030 kg | |||||||
| Field upgrade module, 225, 275 or 300 kVA |
740 x 880 x 1880 mm | 600 kg | |||||||
| 675, 825 kVA | 3710 x 880 x 1880 mm | 2520 kg | |||||||
| 675, 825 kVA + 1 redundant | 4450 x 880 x 1880 mm | 3120 kg | |||||||
| 1100 kVA | 4450 x 880 x 1880 mm | 3120 kg | |||||||
Accessories |
|||||||||
| External battery cabinets with long-life batteries, X-Slot connectivity (Web/SNMP, ModBus/Jbus, Relay, Hot Sync, ViewUPS-X remote display), integrated manual bypass for 225-550 kVA | |||||||||
Communications |
|||||||||
| X-Slot | 4 communication bays | ||||||||
| Serial ports | 1 available | ||||||||
| Relay inputs/outputs | 5/1 programmable | ||||||||
| Compliance with standards | |||||||||
| Safety (CB certified) | IEC 62040-1, IEC 60950-1 | ||||||||
| EMC | IEC 62040-2 | ||||||||
| Performance | IEC 62040-3 | ||||||||
Your search "" did not match any documents or products.
