Avoid the trouble caused from tripped circuit breakers with Eaton's Energy Management System (EMS), which comes integrated into three-phase power distribution units and remote power panels. into your power distribution equipment. The EMS upgrade kit enables you to extend branch circuit monitoring to equipment from Eaton or any other manufacturer. Unify the management of diverse, multi-vendor power distribution systems while receiving real-time and historic information for peak-load planning, troubleshooting and colocation billing.
42 circuits (one panel)
84 circuits (two panels)
208/120V, 380/220V, 400/230V, 415/240V
Wall mounted, standalone unit
11.3 x 15.24 x 4.45
(287 x 387 x 113)
17.0
(7.7)
--
3.4
(1.5)
11.3 x 5.04 x 4.45
(287 x 128 x 113)
3.6
(1.6)
1.5 x 1.02 x 1.02
(38 x 26 x 26)
0.145
(0.068)
2 x 1.57 x 1.18
(51 x 40 x 30)
0.22
(0.1)
3.94 x 3.78 x 1.81
(100 x 96 x 46)
1.56
(0.71)
2.76 x 2.6 x 1.3
(70 x 66 x 33)
1.13
(0.51)
International: 380/220V, 400/230V, 415/240V
Domestic: 208/120V
50/60 Hz (45-65 Hz)
Panel 1: 3 wire + neutral +ground
Panel 2: 3 wire + neutral
The following parameters are configurable:
Individual branch circuit configurables
Monitored parameters
Individual branch circuit alarms (for each breaker)
0°C to 40°C (32°F to 104°F)
-55°C to 85°C (-67°F to 185°F)
0-95% non-condensing
Up to 6,600 ft (2,000m) above mean sea level
Up to 40,000 ft (12,200m) above mean sea level
<40 dBA, excluding alarms
FCC 47, part 15 for Class A devices
CISPR 22/EN 55022 Class A
IEC 61000-4-2 up to 8 kV pulse without damage and no adverse effect to critical load
UL 61010-1
CSA C22.2 No. 61010-1
CE Mark
IEC 61010-1:2001-02
Support from Eaton
Contact me
Phone: (800) 843-9433
Or visit our tech support knowledge base
Send email
