Download document () of 20
Send email
Download
You have exceeded the download limit
OmniVS 230V 1500VA 940W Line-Interactive UPS, Extended Run, Tower, USB port, C13 Outlets
| Product Name |
Eaton Tripp Lite series UPS
|
| Catalog Number |
OMNIVSINT1500XL
|
| UPC |
037332119780
|
| Product Length/Depth |
10.8 in
|
| Product Height |
15.6 in
|
| Product Width |
10.4 in
|
| Product Weight |
32 lb
|
| Compliances |
SASO
CE Marked RoHS REACH FCC Compliant |
| Certifications |
UL 1778
GoST-R IEC/EN 62040-1 IRAM |
| Topology |
Line-interactive
|
| Form factor |
Tower
|
| Package contents |
|
| Input nominal voltage |
230 VAC
|
| Nominal frequency |
50/60 Hz
|
| Input frequency range |
50/60 Hz
|
| Receptacle |
C13
|
| Output nominal voltage |
220V default(220/230/240V)
|
| Electric current - max |
|
| Battery replacement |
RBC51 (quantity 2)
|
| Runtime at half load |
13 min
|
| Relative humidity |
0-95% non-condensing
|
| Output Receptacles |
C13
|
| Product Features |
Expandable Runtime
|
| Product Highlights |
C14 input and 8 C13 outlets
USB port, TEL/DSL/ethernet protection, External battery pack options 1500VA / 1.5kVA tower 230V line interactive extended-run UPS Corrects brownouts and overvoltages from 151 to 282V |
| PowerAlert Software |
For local monitoring via the UPS’s built-in USB port, download PowerAlert software at https://tripplite.eaton.com/products/power-alert
|
| Nominal Output Voltage |
220V
230V 240V |
| Network Management Cards Details |
Network management not supported
|
| Phase (input) |
Single-phase
|
| Runtime at full load |
4.5 min. (940W)
|
| Communication interface |
USB
USB interface cable included |
| Battery Access |
Battery access door
|
| Typical Battery Runtime |
Expandable Runtime
|
| Dc Voltage |
24
|
| Operating Temperature Range |
32° to 104°F (0° to 40°C)
|
| Communications Cable |
USB interface cable included
|
| Included Output Power Cables |
Includes 2 C13 to C14 output power cables
|
| High Voltage Transfer to Battery Power |
282
|
| Low Voltage Transfer to Battery Power |
151
|
| Undervoltage Correction |
Input voltages between 177 and 199 are boosted by 14%
|
| Application |
|
| Switch configuration |
2 Switches control off/on power status and alarm-cancel/self-test operation
|
| Hot Swap PDU Options |
PDUBHV10 (2U / 8 C13 outlets)
|
| AC suppression joule rating |
340
|
| Housing material |
Polycarbonate
|
| Output AC waveform (AC mode) |
Sine wave
|
| Output AC waveform (battery mode) |
PWM sine wave
|
| Output Capacity (kVA) |
1.5
|
| Output Capacity (kW) |
.94
|
| Output Capacity (VA) |
1500
|
| Primary UPS Depth (mm) |
191
|
| Primary UPS Height (mm) |
300
|
| Primary UPS Width (mm) |
183
|
| AC Suppression Response Time |
Instantaneous
|
| Alarm Interface |
Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status
|
| Audible Alarms |
Audible alarm indicates power-failure and low-battery conditions
|
| Battery Start Capability |
Cold-start operation supported
|
| Battery Replacement Description |
Hot-swappable, user replaceable batteries
|
| LED Indicators |
5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
|
| Frequency Rating Details |
Automatic frequency selection
|
| Output Voltage Regulation (Line Mode) |
-18%, +8%
|
| Output Voltage Regulation(Battery Mode) |
+/- 5%
|
| Overvoltage Correction |
Input voltages between 245 and 282 are reduced by 12%
|
| Rechargeable Battery |
Less than 4.5 hours from 10% to 90%
|
| Storage Temperature |
5° to 122°F (-15° to 50°C)
|
| Input Connection Description |
Attached 15cm line cord with C14 inlet. The C14 inlet accepts user-supplied AC power cord with country-specific plug.
|
| Nominal Voltage Details |
230V nominal output in battery mode
|
| Voltage Regulation Description |
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 151 to 282
|
| WatchDog Compatibility |
Supports Watchdog application, OS and hard-reboot restart options for remote applications
|
| Maximum Input Amps |
5
|
| UPS Input Cord Length (m) |
.2
|
| UPS Power Module Dimensions |
11.8 x 7.2 x 7.5
|
| Power Mode Transfer Time |
2-4 milliseconds
|
| Optional Accessories |
Wallmount (UPSWM - tower mounting kit)
|
| EMI AC Noise Suppression |
EMI / RFI AC Noise Suppression
|
| UPS Input Connection Type |
C14 inlet
|
| External Battery Pack Compatibility |
BP24V15RT2U (limit 1)
BP24V28-2U (limit 1) BP24V70-3U (multi-pack compatible) |
| Green Energy-Saving Features |
Greater than 95% efficiency - GREEN UPS
|
| UPS Dataline Suppression |
1 line TEL/DSL (1 in / 1 out)
10/100Base T Ethernet |
| High Availability UPS Features |
Hot swappable batteries
Surge/noise protection Automatic voltage regulation (AVR) |
Support from Eaton
Product specifications
